Viewing input metering data through the meter’s display

You can use the meter’s display to view input metering data.
future improvement: You must have configured input metering and connected your meter’s digital inputs to the input metering transducers.
  1. Navigate to Energy > Inp Mtr > Dmd .
  2. Select an input metering channel to view the input metering data.
    NOTE: The display shows accumulation values from 0 to 99999. The display rolls over to zero when the accumulated value reaches 100,000 and starts incrementing again.
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?