HRB1684301-12

Setting the meter’s clock manually using the webpages

NOTE: Refer to Restoration of temporarily disabled configuration settings in webpages to know availability of these features on your meter model.

You can set the meter’s clock manually using the webpages.

NOTE: You can only set the time manually if Enable Network Time Synchronization is set to No.
  1. Login to the meter webpages.
  2. Based on your meter firmware version, click Settings > Date/Time Settings OR click Settings > Communication > Date Time Settings.
  3. Use the dropdown lists to set the time and date you want to send to the meter.
    NOTE: The default entry is the current date and time on the meter.
  4. Click Save changes or Apply Changes to save the time to your meter.
QR code for this page

Was this helpful?