PowerLogic™ PM5500 / PM5600 / PM5700 series – User manual

Safety precautions
Meter overview
- Overview of meter features
- Your meter in an energy management system
- PM5500 / PM5600 / PM5700 meter models and accessories
- Features differentiation matrix for PM5500 / PM5600 / PM5700 series
- Data display and analysis tools
- Meter configuration
Hardware reference
- Supplemental information
- Meter description
- Removing the PM5563 from the DIN rail
- Meter wiring considerations
- Communications connections
  - RS-485 wiring
  - Ethernet communications connections
- Digital outputs
- Digital inputs
- Analog inputs
Display
- Display overview
- Default data display screen
- Notification icons
- Meter display language
  - Resetting the display language
- Meter screen navigation
- HMI setup screens
- Setting up the display
- Setting up the average voltage (Vavg) on the summary page using the display
Basic setup
- Configuring basic setup parameters using the display
- Configuring advanced setup parameters using the display
- Setting up regional settings
  - Resetting the display language
- Setting up the screen passcodes
- PM5RD device hardware version Ax/Bx support for PM5563 and PM5563RD meter models
- Configuring PM5563 meter for PM5RD device hardware version
- Configuring toroid settings for RCM using the display
Cybersecurity
- Cybersecurity overview
- Product defense-in-depth
- Data encryption
- Default settings
- User accounts and permissions
  - User account lockout policy
- Passwords/Passcodes
  - Default passwords/passcodes and user accounts
  - Changing passwords/passcodes
- Harden the device
  - Enabling/Disabling communication protocols and changing port numbers
- Reporting a security incident or vulnerability
- Firmware upgrades
- Secure disposal guidelines
  - Secure disposal checklist
  - Disposal, reuse, recycling
Webpages
- Webpages (Legacy)
- Webpages (New)
Communications
- Ethernet communications
  - Ethernet configuration
- Serial communications
  - RS-485 network configuration
- BACnet/IP
  - Supported BACnet features
  - BACnet/IP communications implementation
  - Configuring BACnet/IP settings using the display
  - Configuring BACnet/IP settings using the webpages
  - BACnet objects
- EtherNet/IP
  - Cyclical Exchanges (Implicit Exchanges)
  - Messaging (Explicit Exchanges)
- DNP3
- Modbus Ethernet gateway
  - Ethernet gateway implementation
  - Ethernet gateway configuration
    - Configuring the meter as an Ethernet gateway using the webpages
    - Configuring the meter as an Ethernet gateway using ION Setup
- Modbus TCP/IP filtering
- Simple Network Management Protocol (SNMP)
- FTP
  - FTP file structure
  - FTP file permissions
  - FTP filename requirements
  - Enabling and disabling the FTP server using the display
  - Enabling and disabling the FTP server using the webpages
Time and timekeeping
- Setting the clock using the display
- Setting the meter’s clock manually using the webpages
- Configuring time and time synchronization using the webpages
Logging
- Data log
  - Setting up the data log
  - Saving the data log contents using ION Setup
  - Setting up device log exports using the webpages
- Alarm log
- Maintenance log
Inputs / outputs
- I/O overview
- Digital input applications
- Input metering
- Digital output applications
  - Digital output application example
  - Configuring digital outputs using ION Setup
  - Configuring digital outputs using the display
- Energy pulsing
  - Configuring the alarm / energy pulsing LED using the display
  - Configuring the alarm / energy pulsing LED or digital output for energy pulsing using ION Setup
- Analog inputs
  - Configuring analog inputs using the display
    - Configurable units
Resets
- Meter resets
  - Meter Initialization
- Performing global resets using the display
- Performing single resets using the display
- Performing user account resets using the display
Alarms
- Alarms overview
- Alarm types
- Unary alarms
  - Available unary alarms
- Digital alarms
  - Available digital alarms
- Standard alarms
- Logic alarms
- Custom alarms
  - Custom alarm parameter list
- Disturbance (sag/swell) alarms
- Alarm priorities
- Alarm setup overview
- LED alarm indicator
  - Configuring the LED for alarms using the display
  - Configuring the LED for alarms using ION Setup
- Alarm display and notification
- Email on alarm
- Active alarms list and alarm history log
  - Viewing active alarm details using the display
  - Viewing alarm history details using the display
  - Viewing alarms counters using the display
- Acknowledging high-priority alarms using the display
- Resetting alarms using ION Setup
Multi-tariffs
- Multi-tariff
- Multi-tariff implementation
- Command mode overview
- Time of day mode overview
  - Time of day mode tariff validity
  - Time of day tariff creation methods
- Input mode overview
  - Digital input assignment for input control mode
- Tariff setup
  - Configuring input mode tariffs using the display
Measurements
- Instantaneous measurements
- Residual current
- Energy measurements
  - Configuring the energy scaling using ION Setup
- Preset energy
  - Configuring the preset energy using ION Setup
- Min/max values
- Demand measurements
- Power and power factor
- Timers
Power quality
- Power quality measurements
- Harmonics overview
- Voltage crest factor
- K-factor
- Total harmonic distortion %
- Total demand distortion
- Harmonic content calculations
- THD% calculations
- thd calculations
- TDD calculations
- Viewing harmonics using the display
- Viewing TDD, K-factor and Crest factor data
- Viewing THD/thd using the display
- Waveform capture
Maintenance
- Maintenance overview
- Lost user access
- Diagnostics information
- Control power (auxiliary power) interruption event
  - Acknowledging control power (auxiliary power) interruption event using the display
- Wrench icon
- LED indicators
- Phasors
  - Phasor screens
- Meter memory
- Meter battery
- Firmware version, model and serial number
- Firmware upgrades
  - Firmware upgrade methods
- Technical assistance
Verifying accuracy
- Overview of meter accuracy
- Accuracy test requirements
  - Energy pulsing
- Meter settings for accuracy testing
- Verifying accuracy test
  - Required pulses calculation for accuracy verification testing
  - Total power calculation for accuracy verification testing
  - Percentage error calculation for accuracy verification testing
- Accuracy verification test points
- Energy pulsing considerations
- VT and CT considerations
- Example calculations
- Typical sources of test errors
Revenue
- Revenue metering overview
- Revenue metering components
- Revenue firmware security features
- Protected setup parameters and functions
- Revenue-locking summary
- Revenue locking
Device specifications
Restoration of temporarily disabled configuration settings in webpages
China Standard Compliance

HRB1684301-16

Enabling/Disabling communication protocols and changing port numbers

Changing Ethernet communications using the display

See Setting up Ethernet communications using the display for instructions on how to enable/disable HTTP / HTTPS, DPWS, EtherNet/IP and DNP3 settings on your meter.

Changing basic Ethernet settings using the webpages

See Configuring basic Ethernet settings using the webpages for instructions on how to change the basic Ethernet settings of your meter.

Changing advanced Ethernet settings using the webpages

See Configuring advanced Ethernet parameters using the webpages for instructions on how to change the advanced Ethernet settings of your meter.

Changing BACnet/IP settings using the display

See Configuring BACnet/IP settings using the display for instructions on how to change the BACnet/IP settings on your meter.

Changing BACnet/IP settings using the webpages

See Configuring BACnet/IP settings using the webpages for instructions on how to change the BACnet/IP settings of your meter.

Enabling/Disabling DNP3 using the display

See Configuring DNP3 setting using the display for instructions on how to enable/disable DNP3 on your meter.

Enabling/Disabling DNP3 using the webpages

See Configuring DNP3 setting using the webpages for instructions on how to enable/disable DNP3 of your meter.

Enabling/Disabling Modbus TCP/IP filtering using the webpages

See Configuring Modbus TCP/IP filtering using the webpages for instructions on how to enable/disable Modbus TCP/IP filtering of your meter.

Changing SNMP settings using the webpages

See Configuring SNMP using the webpages for instructions on how to change the SNMP settings of your meter.

Enabling/Disabling FTP / FTPS using the display

See Enabling and disabling the FTP server using the display for instructions on how to enable/disable FTP / FTPS on your meter.

Enabling/Disabling FTP / FTPS using the webpages

See Enabling and disabling the FTP server using the webpages for instructions on how to enable/disable FTP / FTPS of your meter.

Enabling/Disabling the communication protocols and changing port numbers using the ION Setup

To enable/disable the HTTP / HTTPS, FTP / FTPS, DPWS, SNMP, DNP3, EtherNet/IP and BACnet/IP communication protocols using ION Setup , see the section for your meter in the ION Setup online help or in the ION Setup device configuration guide, available for download at www.se.com .

Show QR code for this page

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information

Legal Information