Open Source Software Used in the 4inch Touch Unit
The 4" Touch Unit contains, among other things, Open Source Software files, as specified below, developed by third parties and licensed under an Open Source Software license. These Open Source Software files are protected by copyright.
Your right to use the Open Source Software is governed by the relevant applicable Open Source Software license conditions.
Warranty regarding use of the Open Source Software:
Schneider Electric SE and all of its subsidiaries ("Schneider Electric Group") provide no warranty for the Open Source Software contained in the 4" Touch Unit, if such Open Source Software is used in any manner other than intended by Schneider Electric Group. The licenses listed below define the warranty, if any, from the rights holders of the Open Source Software. Schneider Electric Group specifically disclaims any warranty for defects caused by altering any Open Source Software or the 4" Touch Unit’s configuration. Any warranty claims against Schneider Electric Group in the event that the Open Source Software contained in the 4" Touch Unit infringes the intellectual property rights of a third party are excluded.
Technical support, if any, will only be provided for unmodified software.
Further use of Open Source Software:
Your compliance with those license conditions will entitle you to use the Open Source Software as foreseen in the relevant license. In the event of conflicts between other Schneider Electric license conditions applicable to the 4" Touch Unit and the Open Source Software license conditions, the Open Source Software conditions shall prevail. The Open Source Software is provided royalty-free (i.e. no fees are charged for exercising the licensed rights).
The following Open Source Software is contained in this 4" Touch Unit:
Open source package |
Link to the website |
---|---|
zlib |
|
libjpeg |
|
linux_kernel |
|
ncurses |
|
u-boot |