SpaceLogic KNX / Secure, Switch/Blind Master Switch Blind Secure 5810/1.2 – Application Description

Safety Information
About the Document
Operating ETS Software
- Special Features of the ETS Software
  - Restoring Defaults
  - Dependent Functions and Parameters
Overview of Application Functions
General Settings
Extended Settings
Express Settings for Switching
Extended Settings for Switching
Express Settings for Blind/Roller Shutter
- Blind/Roller Shutter Control
  - Group Objects for Express Settings – Blind/Roller Shutter
- Channel Name
- Drive Running Time
  - Same Running Times for Up and Down
  - Different Running Times for Up and Down
  - Pause Time before Reverting (Pause on Reverse)
- Slat Control (for Blind only)
- Locking Manual Mode
  - Group Objects for Lock of Manual Mode
- Scenes
  - Enabling Scenes
    - Group Objects for Scene
  - Number of Scenes
  - Time Delay for Scene Processing
  - Calling and Saving Scene Values
  - Overwrite Scene Values during Download
  - Priority
- Central Function for Blind
  - Enable Central Function for Each Drive
    - Group Objects of the Central Function
- Status Response
- Activating Extended Settings for Blind/Roller Shutter
Extended Settings for Blind/Roller Shutter
Express Settings for Roller Shutter
Extended Settings for Roller Shutter

2601_MTN6705-0008S_MTN6805-0008_SW

Group Objects for Weather Alarms

No.	Name	Object function	Length	Behavior	Data Type
18	Central	Wind alarm 1	1 bit	Received	1.005 Alarm
19	Central	Wind alarm 2	1 bit	Received	1.005 Alarm
20	Central	Wind alarm 3	1 bit	Received	1.005 Alarm
21	Central	Rain alarm	1 bit	Received	1.005 Alarm
22	Central	Frost alarm	1 bit	Received	1.005 Alarm

Show QR code for this page

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information

Legal Information

Change your cookie settings