Pair Your Controller

After registering (Create Your User Account) and login (Logging In) for the first time, a welcome screen appears asking you to pair your controller.

To pair your controller:

1. Tap .

   NOTE: Make sure your controller is powered and wired, and your phone is connected to the same network.

2. Tap Next.

3. Go to your controller > install the latest firmware available on https://www.se.com (Firmware Update).

4. Enable both the Cloud connector and IoT third party API applications.

   NOTE: This firmware includes the required applications from the Cloud Marketplace (Cloud connector, IoT third party API, and Manager visualization).

5. Make sure you have:

   • Existing widget-based Manager visualization created in your controller with all the devices organized in Rooms (Creating Manager Visualization).

   • All the devices group objects properly configured in their widgets.

6. Reboot your controller and tap Next in the mobile application.

7. In the mobile application, tap Search for the controller and you can:

   • Tap one controller you want to pair from the list of available controllers. The pairing will start automatically.

     or,

   • Tap Enter manually > enter the IP or MAC address of the controller > tap Pair.

8. Name your controller after pairing and tap Next.

9. Enter your address or search for it on the map. Tap Next.

10. Check or correct your data > tap Submit.

Your controller is paired and set up. It appears at the top of the application’s home page.

If you want to pair another controller later, go to home screen, tap > Home Management > Pair new controller and follow the wizard.