Access to Standard Web Server

The section explains how to connect the TeSys Tera system to the standard web server.

1. Connect the LTMT main unit to your PC.

2. Open a web browser.

3. In the address bar, enter the IP address assigned to the LTMT main unit. For more information on the IP addressing, refer to IP Addressing.

4. If the connection is accepted, the login page appears.

   

5. When you connect for the first time, enter Administrator in the Username field and Schneider@24 in the Password field.

   

6. Click Login.

   Result: You are prompted to change your password.

   

7. Provide the following information and click Submit:

   • Current Password

   • New Password

   • Confirm Password

   NOTE: To ensure account security, your new password must:

   • Be at least eight characters long.

   • Include at least one uppercase and lowercase letters from a to z.

   • Contain at least one number from 0 to 9.

   • Include at least one special character (example: !, @, &, * and so on).

   • Avoid using three or more consecutive identical or sequential characters (example: aaa, 111, 123, and so on).

   • Avoid using most common passwords.

   Result: The Password Modified Successfully pop-up message appears.

8. Click OK.

   Result: You are redirected to the login page.

9. Enter Administrator in the Username field and your new password in the Password field.

10. Click Login.

    Result: The Monitoring & Control page appears.