Reference Movement with Movement Range Limitation

• The blinds/roller shutters may move outside the movement range limits and into any open windows. For this reason, consider where the reference movement is to be made (Calibration).
• After a download or bus voltage recovery, a reference movement is made after initialization, even if the General reference movement function is disabled. The blinds/roller shutters may move outside the movement range limits and into any open windows. (Calibration)

• After a download or bus voltage recovery, the movement range limitation may be disabled because no activation telegram has been received.
• For this reason, consider where the reference movement is to be made: The reference movement after initialization is generally carried out towards the upper end position. A reference movement to the lower end position is only carried out if the parameter Reference position is set to lower.
• Functions with a higher priority, such as safety function or alarm function, can also control blinds/roller shutters outside the movement range limitation.